LMR系列摆线液压马达

主要性能参数 Main Specifi**ion

1.断续工作压力指入口工作压力，连续工作压力指工作压差。

2.马达不应同时在压力和转速下工作。

3.推荐用68#抗磨液压油，粘度37-73cSt，清洁度ISO18/13。

4.马达在断续工作条件下，运行时间每分钟不得超过10%。

5.工作油温80°

6.马达满负荷工作前，应在工作压力的40%以下磨合1h。

7.马达允许背压10MPa，但推荐不要超过5MPa，超过时应接外泄油管。

1. Intermittent means the e**ance of the ma**mum pressure; continuous wo**ng pressure means the differential pressure

2. Motor should not work under the highest pressure and the ma**mum speed

3. Re**mending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.

4. The running time should not exceed 10% under intermittent wo**ng conditions

5. The Ma**mum wo**ng temperature is 80 °

6. One hour running time under 40% of ma**mum wo**ng pressure is re**mended before full capacity wo**ng.

7. The ma**mum allowable back pressure is 10MPa, but the re**mended back pressure should not exceed 5MPa.a leaking pipes is needed when exceeding

LMP 连接尺寸----外形图 Dimension and Mounting data

LMR 连接尺寸----安装法兰 Mounting flange; Rabbets

LMR 连接尺寸----输出轴 Shaft

LMR 连接尺寸----油口 Port

LMR 订货信息 Ordering Information

LMR Ordering Information